Vallas Aluminio MálagaAluminium & steel slat fencing
Anthracite horizontal slat fence on a low textured base in front of thujas
Aluminium slats

Aluminium slat fence: privacy for Costa del Sol villas

A clean, low-upkeep screen made of aluminium profiles between posts – one of the most requested fences for modern villas, and one that is only as good as the structure underneath it.

An aluminium slat fence is a privacy fence made of extruded aluminium profiles (slats) slotted or screwed between aluminium posts or masonry pillars, standing on concrete footings or a low wall, and finished with a factory coating such as powder coat.

What is an aluminium slat fence?

In short: a fence of aluminium profiles held between posts or pillars, designed to screen views with little maintenance.

The panel of an aluminium slat fence is built from long, hollow aluminium profiles – the slats – that sit one above the other (or side by side, in a vertical layout) inside channels on the posts. Depending on the system, the slats interlock to form a closed screen, or are spaced with small gaps that let light and some air through.

The posts can be aluminium, fixed to a footing or a wall with a base plate or set into concrete, or the slats can run between masonry pillars. The finish is applied in the factory, typically powder coating in a plain colour such as anthracite, white or bronze, or a printed wood-grain effect, which has its own page.

What clients see is the panel. What decides whether the fence stays straight is everything else: the line, the footings, the post spacing and the fixings. That is where most of our work goes.

Which properties is it best suited to?

In short: villas, townhouses and community frontages where privacy and appearance matter more than covering long distances cheaply.

Aluminium slats are at their best on the parts of a property people look at: the street frontage, the side facing a neighbour's terrace, the garden around a pool area, or a short run that hides bins, a car port or a plant room.

They are a good fit for owners who spend part of the year away. Aluminium does not need painting, and the factory coating keeps its colour far better than stained timber in strong sun. For coastal plots, the material choice is one of the main reasons people pick aluminium over steel; our guide on aluminium near the sea explains what still needs attention.

They are less suited to long rear boundaries on rural plots, where the length makes a solid screen expensive and a mesh fence is usually the sensible choice.

Anthracite horizontal slats between beige split-face block pillars
Anthracite horizontal slats between beige split-face block pillars

Should it go on a low wall or on posts?

In short: both work; a murete gives a solid base and hides changes of level, while posts on individual footings keep the line lighter and suit gardens.

There are two main ways to build an aluminium slat fence.

On a murete (low wall). We build a block or concrete wall along the line and fix the posts on top of it or between pillars. The wall deals with small changes in ground level, keeps soil and garden water off the bottom slat, and gives the classic Spanish villa frontage. We cover this format in detail on the page about the aluminium fence on a wall.

On posts with their own footings. Each post sits in its own concrete footing (a dado) and the slats start just above the ground. This keeps the fence lighter visually and is often chosen inside gardens or between neighbours.

The right choice depends on the ground, the height, how exposed the line is to wind and what your community allows. A closed screen catches a lot of wind, so on exposed plots we take extra care with post spacing and footings – see our guide on wind and slatted fences.

Anthracite slat fence turning a corner with grey pillars
Anthracite slat fence turning a corner with grey pillars

What should you check before ordering?

In short: the boundary line, town hall requirements, your urbanisation's design rules and whether any existing wall can actually carry the fence.

Before we set out a single stake, four things need answers:

  • The lindero. Is the line you want to fence actually your boundary? If a neighbour is involved, agree it before work starts.
  • The ayuntamiento. Most fence works need some form of authorisation. The type and the limits depend on your town and the planning rules for your plot.
  • The community. Many urbanisations regulate height, colour and whether frontages may be closed. Our guide to urbanisation design rules covers what to ask.
  • Existing walls. If you plan to reuse a wall, it has to be checked; a wall that retains soil is not a fence base and needs a technician's opinion.

We provide the fence description and drawings you need for any application, but we do not handle permits ourselves.

How do you look after an aluminium slat fence?

In short: rinse off salt and dust, wash gently, and check fixings occasionally; avoid abrasive cleaners that damage the coating.

Aluminium slats need little care, but they are not maintenance-free. Near the coast, salt deposits build up in the grooves and on the top surfaces, and dust settles on horizontal profiles after every dry spell.

A rinse with fresh water and a soft brush or sponge with a mild detergent is usually enough. What to avoid: pressure washers held close to the surface, scouring pads and solvent cleaners, all of which can damage the coating. Once a year it is worth walking the line and checking screws, caps and the base of each post.

Our maintenance and cleaning guide goes into more detail, including what to do about scratches.

Brown horizontal slats with rendered pillars
Brown horizontal slats with rendered pillars

What affects the cost of an aluminium slat fence?

In short: length, height, slat system, closed or gapped panels, the base (wall or individual footings), ground conditions, access and any removal work.

We do not publish prices for aluminium slat fences, because the panel is only part of the job. The main cost drivers are listed below, and every one of them appears as a separate line in our quotes.

For a more general explanation of how fence prices are built up, see presupuestovalla.eu, and for this type of fence specifically our article on aluminium fence cost in 2026. If you are tempted by a much lower offer, read cheap versus quality aluminium fencing first.

BR
Bauman Raymond Attila
Author and person responsible · Last reviewed:
How we build it – step by step

How we build it – step by step

  1. Measurement and setting out

    We measure the line, record levels and agree the exact position of the fence with you.

  2. Excavation

    We dig the trench for a wall footing or the holes for individual post footings, depending on the design.

  3. Footings

    We pour the concrete footings that will carry the posts or the wall.

  4. Wall or plinth

    If the design includes a murete or plinth, we build it and leave it ready for the posts or brackets.

  5. Posts

    We set and plumb the aluminium posts or prepare the fixings on the pillars.

  6. Slat panels

    We fit the slats into the posts, checking level and alignment run by run.

  7. Caps and trims

    We fit post caps, end profiles and any trims that close the system.

  8. Clean-up and handover

    We clear the site, remove waste and walk the line with you or send photos.

When is it the right choice – and when not?

When is it the right choice – and when not?

A good fit if…

  • Street frontages of villas and townhouses
  • Screening terraces and garden areas from neighbours
  • Owners who want little maintenance and live abroad part of the year
  • Coastal plots where rust is a concern
  • Modern houses with clean lines

Consider another option if…

  • Long rural boundaries where mesh is more sensible
  • Livestock or game fencing
  • Acting as a retaining wall for soil
  • Situations where the community does not allow closed frontages
  • Owners looking for the lowest possible cost per metre
What affects the cost?

What affects the cost?

We don't publish fixed prices: every fence is quoted line by line using these factors.

  • Linear metres and height
  • Slat system and profile
  • Closed panels or panels with gaps
  • Colour or wood-effect finish
  • Murete, plinth or individual post footings
  • Ground conditions and slopes
  • Access for materials
  • Removal of an old fence and clearing of the line
  • Licence and community approval

Fence cost calculator See how a fence quote is put together

Itemised quoteItemisedquoteLinear metresHeightPanel typeLow wall or notFoundationsGround & slopeAccessOld fence removalClearingPermit
Keep reading

Articles and guides

Anthracite slats on a white rendered wall with dark caps

Aluminium fence on a wall: murete and slats built as one

The classic Costa del Sol frontage – a rendered low wall with aluminium slats above – works well only when the wall was designed to carry the fence and the wind it catches.

View details →
Anthracite louvred gates and panels with rendered pillars

Louvred fence panels: privacy that lets the air through

Angled blades, like a window shutter or persiana, hide the garden from passers-by while the sea breeze still moves through – a format that suits the coast particularly well.

View details →
Anthracite slat fence turning a corner with grey pillars

Horizontal or vertical slat fence: how each one is built

Slat direction is not only a style choice. It changes how the fence is framed, how it follows the ground and how it handles wind – which is why we decide it together with the structure.

View details →
Anthracite slats with white rendered pillars and a dark plinth band
Technical guides

Aluminium fences near the sea: what salt air really does

Most of our clients live within reach of the sea breeze. That is a good reason to choose aluminium – and a reason to pay attention to coatings, fixings and details.

View details →
Anthracite slats on a white rendered wall with dark caps
Technical guides

Wind and slatted fences: how the structure has to respond

A slat fence is a sail. On an exposed plot, the wind it catches has to travel down the posts into the footings – which is why the parts you never see decide whether the fence stays straight.

View details →
Itemised quoteItemisedquoteLinear metresHeightPanel typeLow wall or notFoundationsGround & slopeAccessOld fence removalClearingPermit
Blog

What an aluminium slat fence costs in 2026 – and why it varies

Owners ask for a price per metre. The honest answer is that the panel is only part of the bill – and the parts you never see are where fence quotes really differ.

View details →
FAQ

Frequently asked questions

Does aluminium rust?

Aluminium does not rust in the way iron and steel do. It can still show surface corrosion if the coating is damaged and salt is left on it, which is why rinsing and good fixings matter.

Can the slats be fully closed?

Yes. Many systems interlock to form a closed screen. Closed panels give the most privacy but also catch the most wind, which affects the structure.

Are gaps between slats possible?

Yes, many systems allow spacers between the slats. Small gaps let light and some air through while still blocking most direct views.

What colours are available?

Powder-coated aluminium comes in a wide range of colours, with anthracite, white and earthy tones common on the coast. Wood-effect finishes are also available.

Can you fit the slats between existing pillars?

Often yes, if the pillars are plumb and sound. We check them first, because pillars that lean or crack will spoil the line of the new fence.

Do I need a wall under the fence?

Not always. A wall helps on uneven ground and keeps garden water and soil off the slats, but posts on individual footings are a valid option on level ground.

How do you deal with sloping ground?

With horizontal slats, we usually step the fence in level sections. Vertical slats can follow a slope more easily. Our page on horizontal and vertical layouts explains the options.

Can I supply my own slats?

Yes. We can build with material you supply, after checking that the system is complete and suits the site.

Is an aluminium fence noisy in the wind?

Well-fitted slats with the right end profiles and caps should not rattle. Loose fixings or missing caps are the usual cause of noise.

Will the colour fade in the sun?

Factory finishes are designed to resist UV, but quality varies between products. Ask for the finish specification of the system you choose and compare like with like.

Get a quote

Planning a slat fence for your villa?

Send photos of the boundary and the approximate length. We reply with a first assessment and, after a visit, an itemised quote with no commitment.