
Wind and slatted fences: how the structure has to respond
A slat fence is a sail. On an exposed plot, the wind it catches has to travel down the posts into the footings – which is why the parts you never see decide whether the fence stays straight.
Why does wind matter so much for slat fences?
In short: a closed slat fence presents a large solid surface to the wind, and that force goes into posts, fixings and footings.
Mesh fences let the wind pass almost freely. A closed slat fence does the opposite: every square metre of panel faces the wind and transfers its pressure to the posts. The taller the fence, the greater the area and the greater the lever acting on the base of each post.
The Costa del Sol has its own winds – the easterly levante and the westerly poniente – and hillside plots in places like Benahavís or Ojén can be much more exposed than a garden on flat ground near the beach. Two fences built from the same panels can behave very differently depending on where they stand.
How do closed, gapped and louvred fences compare?
In short: closed screens catch the most wind; gaps reduce the load; louvres let a good part of the air through while keeping privacy.
Three broad options:
- Closed slats or profiled sheet. Maximum privacy and the maximum wind load. Common on frontages, but they need the most robust structure.
- Slats with gaps. Small gaps between slats let some air through and reduce the load, while still blocking most direct views. See horizontal or vertical slats for how gaps are set in each layout.
- Louvred panels. Angled blades block the view straight on while air passes between them. On exposed plots, louvred fence panels are often the best compromise.
We do not quote percentages or wind-speed ratings, because they depend on specific products and calculations. What matters is the principle: the more open the fence, the less load it puts on the structure.

Which parts of the fence carry the wind?
In short: the posts, their fixings and the footings or wall beneath them; panels rarely fail first.
When a slat fence fails in the wind, the slats themselves are rarely the first problem. The usual culprits are:
- Post spacing too wide for the height and exposure;
- Posts too light for the panel area they carry;
- Footings too small or too shallow for the lever acting on the post;
- Base plates anchored into weak material – the top of a hollow, unreinforced wall, for example;
- Rail fixings on vertical-slat systems that loosen over time.
We size posts, spacing and footings according to the height, the type of panel and how exposed the line is. For fences on an existing wall, the wall becomes part of the structure, which is why our guide on fixing to an existing wall insists on checking it first.
Is there an official standard for wind loads?
In short: Spain's Código Técnico de la Edificación sets out how wind actions on buildings are calculated; whether a fence needs a calculation is a technician's decision.
Spain's building code, the Código Técnico de la Edificación (CTE), includes a basic document on actions on buildings, the DB-SE-AE, which covers wind among other loads. It is the framework technicians use for structural calculations.
We are a fencing contractor and we do not carry out structural calculations. For ordinary garden and frontage fences we apply sound construction practice: appropriate posts, spacing, footings and fixings for the site. For unusually tall screens, very exposed locations or fences that combine with retaining structures, we recommend involving a technician (arquitecto, aparejador or ingeniero) who can assess the design against the code. Whether such an assessment is required in a given case is something to confirm with the town hall.
How should you plan a fence on an exposed plot?
In short: choose a more open panel where you can, reduce height where privacy allows, build solid footings, and avoid relying on old walls.
Practical steps for exposed sites:
- Decide where full privacy is really needed and use more open panels elsewhere.
- Do not choose the maximum height everywhere by default; a lower screen in the right place can be enough.
- Prefer a new, properly founded murete or individual footings to an old wall of unknown construction.
- Use caps and end profiles that stop slats rattling, and check fixings after the first stormy season.
Our article on slat fences for villas with views and wind applies these ideas to hillside villas.
What should you check after a storm?
In short: walk the line, look for leaning posts, loose slats, cracks at fixings and missing caps, and send photos if anything moved.
After a strong wind, take a few minutes to walk the fence – or ask whoever looks after the house to do it. Look for posts that are no longer plumb, slats that have moved in their channels, cracks in the wall around fixings and missing caps.
Small problems found early are easy to fix. A post that has started to lean will not straighten itself, and the next storm will push it further. If in doubt, send us photos. Routine checks are described in our maintenance and cleaning guide.
Official sources
Articles and guides

Louvred fence panels: privacy that lets the air through
Angled blades, like a window shutter or persiana, hide the garden from passers-by while the sea breeze still moves through – a format that suits the coast particularly well.
View details →
Aluminium slat fence: privacy for Costa del Sol villas
A clean, low-upkeep screen made of aluminium profiles between posts – one of the most requested fences for modern villas, and one that is only as good as the structure underneath it.
View details →
Horizontal or vertical slat fence: how each one is built
Slat direction is not only a style choice. It changes how the fence is framed, how it follows the ground and how it handles wind – which is why we decide it together with the structure.
View details →Fixing a slat fence to an existing wall: what we check first
Reusing a sound wall is sensible. Bolting a tall screen onto a wall that was never designed for it is one of the most common causes of cracked, leaning fences we are asked to fix.
View details →
Slat fences for villas with views and wind: who they suit
Hillside villas on the Costa del Sol were often built for their views. A fence there has to protect privacy without boxing the house in – and survive the wind that comes with the view.
View details →Frequently asked questions
Can a slat fence blow over?
Yes, if posts, spacing, footings or fixings are not suited to the wind it catches. Properly designed fences on suitable bases stay put.
Are louvred panels better in the wind?
Generally yes, because part of the wind passes through. They still need a structure sized for the site.
Do gaps between slats help?
Yes, small gaps reduce the load while keeping most of the privacy.
Can you tell me the wind rating of a fence?
We do not give wind ratings. They depend on specific products and calculations, which are a technician's job.
Is a taller fence much more affected by wind?
Yes. More height means more area and a longer lever on the post base, so the structure has to increase accordingly.
Is horizontal or vertical better in the wind?
The direction matters less than how closed the fence is. Vertical systems add rails, whose fixings must be sound.
Can I put a closed fence on my old garden wall?
Only after the wall has been checked. Many old walls were never designed to carry a tall, closed screen.
Do you do structural calculations?
No. For cases that need them, we recommend a technician and build to their design.
Why do slats rattle in the wind?
Usually loose fixings, missing end profiles or caps. These are simple to correct.
What should I do if a post leans after a storm?
Send us photos as soon as possible. Leaning usually indicates a problem at the footing or fixing.
Planning a slat fence for your villa?
Send photos of the boundary and the approximate length. We reply with a first assessment and, after a visit, an itemised quote with no commitment.