
Urbanisation design rules: what to check before a new fence
In many Costa del Sol urbanisations the question is not only what the town hall allows, but what the community allows. Getting both answers before you choose a design saves time and arguments.
Why are there two sets of rules?
In short: because the town hall regulates building works through planning law, and the community of owners may have its own rules on the look of the estate.
The first layer is public. In Andalucía, land use and building works are governed by regional planning law – currently the Ley 7/2021 de impulso para la sostenibilidad del territorio de Andalucía (known as LISTA) – and by each town's own planning instruments: the PGOU and its ordenanzas. These set what may be built, where and, often, to what height.
The second layer is private. Many urbanisations are organised as a community of owners (comunidad de propietarios) or a similar entity with statutes and internal rules. Those can regulate the appearance of the estate: fence heights on frontages, colours, materials, whether the street side may be closed, and sometimes slat direction.
A fence has to satisfy both. A design the town hall would accept can still be rejected by the community, and vice versa.
What does the town hall decide?
In short: whether the fence needs a licence or a declaración responsable, and the planning limits that apply to your plot.
The Andalusian law distinguishes between works that need a municipal licence (licencia urbanística) and works that can proceed on the basis of a declaración responsable or prior communication. Which route applies to your fence, and what documents are needed, is decided by the town hall under its ordinances; it can differ between towns and with the type of land your plot sits on (check with your ayuntamiento).
The planning limits – maximum height, how much of the frontage may be solid, setbacks from roads – also come from the town's rules. We do not quote figures for any town, because they change and depend on the plot. Ask the urbanismo department, or ask your architect or gestor to do it.
For a broader overview of fence permits, see the guide on our main site: fence permits in Spain. We do not handle permits, but we provide the fence description and drawings you need.
What can the community of owners regulate?
In short: the external appearance of the estate – often heights, colours, materials and the openness of frontages – through its statutes and agreements.
Where an urbanisation is set up under Spain's horizontal property law (Ley 49/1960), owners generally cannot alter the exterior configuration of the property on their own; changes affecting the common appearance need the community's agreement. How exactly this applies to a detached villa in an estate depends on how the community is legally constituted and on its statutes (check with your administrador).
In practice, communities often have written design rules covering:
- height of fences and walls on street-facing boundaries;
- permitted colours and finishes, sometimes a single specified colour;
- whether the upper part of a frontage must be open or partly open;
- materials that are not allowed, such as sheet metal on frontages;
- sometimes the direction of slats or the type of coping on walls.
What should you ask before choosing a design?
In short: ask the administrador for the current design rules and any approval procedure, and ask the town hall for the authorisation route and limits.
A short checklist for the administrador (the community's manager):
- Are there written design rules for fences and walls? Please send the current version.
- Is approval needed before works start, and how is it requested?
- Are there approved colours, materials or a reference fence already built in the estate?
- Are there rules about works schedules, noise or access for contractors?
And for the town hall:
- Which authorisation route applies – licence or declaración responsable?
- What height and design limits apply to this plot?
- What documents should accompany the application?
Once you have these answers, choosing between an aluminium slat fence, louvred panels or slats on a wall becomes much simpler.
What about the boundary with your neighbour?
In short: agree the line and any shared wall in writing before work starts; the community rules do not settle private boundary questions.
Design rules deal with appearance, not ownership. If the new fence follows the lindero with a neighbour, agree the exact line before we set it out. If you plan to fix the fence to a wall that may be shared, agree that too, in writing.
Our main site has a dedicated guide to boundary fences with neighbours. If you live abroad, consider asking a local representative to handle this conversation; misunderstandings are much easier to avoid face to face.
How do you design a good fence within strict rules?
In short: work with the rules: choose the best finish within the permitted palette, use louvres or gaps where openness is required, and pay attention to detail.
Strict rules do not mean a dull fence. Within a fixed colour, the quality of the slat profile, the coping, the pillar finish and the alignment make the difference. Where frontages must be partly open, louvres or gapped slats can provide privacy while respecting the rule – if the community confirms that the specific panel complies.
We prepare a description of the proposed fence – materials, colour, height, layout – that you can submit to the community. Our guide to colours and finishes helps with the colour side, and horizontal or vertical slats covers layout.
Official sources
Articles and guides

Aluminium slat fence: privacy for Costa del Sol villas
A clean, low-upkeep screen made of aluminium profiles between posts – one of the most requested fences for modern villas, and one that is only as good as the structure underneath it.
View details →
Aluminium fence on a wall: murete and slats built as one
The classic Costa del Sol frontage – a rendered low wall with aluminium slats above – works well only when the wall was designed to carry the fence and the wind it catches.
View details →
Louvred fence panels: privacy that lets the air through
Angled blades, like a window shutter or persiana, hide the garden from passers-by while the sea breeze still moves through – a format that suits the coast particularly well.
View details →
Colours and finishes for aluminium and steel slat fences
Colour is the decision owners spend longest on, and the one most often limited by community rules. A few principles make it much easier.
View details →
Concerns before ordering a slat fence: the questions to ask
Most owners have the same worries before ordering a fence: will it stand up, will the community object, will the price change, and how will I know the job is done right if I am not here?
View details →Frequently asked questions
Do I need permission from my urbanisation for a new fence?
In many urbanisations, yes, especially on street-facing boundaries. Ask the administrador for the current rules and approval procedure.
Does the town hall also need to authorise it?
Usually some form of municipal authorisation is required. Whether it is a licence or a declaración responsable depends on the town and the work.
Can you tell me the maximum fence height in my town?
No, we do not quote heights from memory. They depend on the town's planning rules and the plot; ask the town hall.
Who is the administrador?
The professional or company that manages the community of owners on its behalf. They hold the statutes and design rules.
Can the community make me remove a fence?
If a fence breaches valid community rules, the community may take action. That is why approval before building is important.
Do you apply for permits?
No. We provide the description and drawings of the fence for your application or your representative's.
What if the rules are unclear or outdated?
Ask for a written answer from the administrador about your specific design before ordering materials.
Are colour rules common?
Many urbanisations regulate colours on frontages, sometimes with a single permitted colour. Others are more flexible.
Can louvres satisfy a rule that frontages must be open?
Sometimes, but only the community can confirm whether a particular panel complies with its rule.
Do the rules apply to the back of my plot too?
It depends on the statutes. Some rules only cover street-facing boundaries; others apply everywhere.
Planning a slat fence for your villa?
Send photos of the boundary and the approximate length. We reply with a first assessment and, after a visit, an itemised quote with no commitment.