
What owners wish they had known before building a slat fence
We do not publish client quotes or ratings. What we can share is what we see again and again on site – the things owners tell us they would have done differently. Here they are as practical advice.
Would it have helped to get the rules earlier?
In short: yes; owners who request the community's design rules and check the town hall route first avoid redesigns and delays.
The single most common regret is starting with the design and only then discovering the rules. A colour that is not allowed, a height that exceeds the limit, a frontage that must stay partly open – each one means going back to the start.
Get the community's written design rules and ask the town hall about the authorisation route before you choose. Our guide to urbanisation design rules lists the questions.
Is the height people choose usually right?
In short: often not: some owners go higher than they need, others too low in the one spot where they are overlooked; test it first.
Height is hard to judge from a drawing. Some owners choose the maximum everywhere and later find the garden feels closed in. Others choose a moderate height and discover that one neighbour's terrace still looks straight into their pool area.
Before deciding, stand where you sit and look out. Hold a pole or a tape at the planned height in the problem spots. Often the right answer is different heights on different stretches, within the limits that apply.
What about walls and what lies under the ground?
In short: owners often wish they had had the existing wall checked earlier and accepted that groundwork is where quality really lies.
Owners who reused an old wall without checking it are the ones most likely to call us later about cracks. Equally, owners who chose the quote with the lightest groundwork tend to discover why the footings matter after the first strong wind.
The parts you cannot see are the ones that decide whether the fence stays straight. Read fixing to an existing wall and, for the build itself, the aluminium fence on a wall page.
Do colours look the same on site as in the brochure?
In short: rarely; strong southern light changes colours, so look at large samples outside, against your own walls.
Many owners say the colour looked different once installed. Strong light flattens dark tones and exaggerates warm ones, and small samples are misleading. Look at large samples outdoors, at different times of day, held against your render, pillars and window frames. Our guide to colours and finishes has more tips.
Would a mix of fence types have been better?
In short: often yes; owners who use one premium fence everywhere sometimes realise a simpler fence on hidden boundaries would have done.
A premium screen on a rear boundary that nobody sees is a common afterthought. Equally, a closed screen next to a terrace can make it hot and still, where louvred panels would have kept the breeze. Thinking stretch by stretch – frontage, terrace, sides, back – usually gives a better fence for the same budget. Our article on horizontal, vertical or louvred slats helps with that.
What about managing from abroad and neighbours?
In short: owners abroad value photo updates of the hidden stages; everyone benefits from agreeing the line with neighbours first.
Owners who live abroad tell us that photos of the footings and fixings – the stages they would never otherwise see – were what gave them confidence. Ask for them from whoever builds your fence.
And whatever the fence, agreeing the boundary line and any shared wall with the neighbour before work starts avoids the most unpleasant kind of delay.
Articles and guides

Your first fence in Spain: the best slat fence options to start with
Many owners who contact us have never commissioned a fence before – and certainly not in Spain, in another language, under rules they do not know yet. These are the options that rarely disappoint.
View details →
Aluminium fence on a wall: murete and slats built as one
The classic Costa del Sol frontage – a rendered low wall with aluminium slats above – works well only when the wall was designed to carry the fence and the wind it catches.
View details →
Louvred fence panels: privacy that lets the air through
Angled blades, like a window shutter or persiana, hide the garden from passers-by while the sea breeze still moves through – a format that suits the coast particularly well.
View details →
Colours and finishes for aluminium and steel slat fences
Colour is the decision owners spend longest on, and the one most often limited by community rules. A few principles make it much easier.
View details →Frequently asked questions
Do you publish client opinions?
No. We prefer to explain our process and what we see on site, and let you judge from the quote and the work.
What is the most common regret?
Choosing the design before checking the community and town hall rules.
How do I choose the right height?
Test it on site with a pole or tape at the problem spots, and check the limits that apply.
Is it worth checking my existing wall?
Yes. A wall that cannot carry the fence leads to cracks and leaning later.
Why does the colour look different once installed?
Strong light changes how colours read. Large outdoor samples give a better idea.
Should I use the same fence everywhere?
Not necessarily. A mix often gives a better result for the same budget.
How can I follow the work from abroad?
Ask for photo updates at key stages, especially footings and fixings.
Is it worth talking to the neighbour first?
Yes, agree the line and any shared wall before work starts.
What would you advise doing first?
Get the rules, take photos of the boundary, estimate the length and ask for an itemised quote.
Can I see examples of your work?
Our gallery and projects pages show photos of our own jobs.
Planning a slat fence for your villa?
Send photos of the boundary and the approximate length. We reply with a first assessment and, after a visit, an itemised quote with no commitment.